BOOSTER CABLE OPERATION
When jump starting. Always wear proper eye protection and never lean over the battery. Do not
jump start a damaged battery. Inspect both batteries before connecting the booster cables. Be
sure vents and caps are tight and level. Place damp cloth over the vent caps of both batteries.
Make sure that the vehicles are not touching and both ignition switches are turned in the “OFF”
position.
- Connection positive (+) booster cable to positive of discharged battery.
- Connection other end of positive (+) terminal to assisting battery.
- Make final connection of negative (-) cable to negative (-) terminal or engine block/frame
of stalled of stalled vehicle. - You are now ready so start your stalled vehicle.
- In removing the cable, remove ib reverse order connection.
